Creating professional-quality livestreams used to require expensive camera equipment, complicated setups, and even a dedicated camera operator. But with the rise of solo creators, online educators, and remote professionals, a smarter solution is becoming essential: an AI-powered PTZ camera that can automatically follow your movements and keep you in the frame.
The EMEET PIXY AI Tracking Webcam is designed to simplify professional video creation. Powered by intelligent tracking, PTZ movement, gesture control, and customizable position presets, PIXY helps creators achieve dynamic, studio-like video without complicated equipment.
Whether you are livestreaming, teaching online, hosting virtual events, or presenting products, PIXY gives you more freedom to move while keeping your audience focused on your content.
In this guide, we'll walk you through the key features of EMEET PIXY, explain how to set up and use its PTZ functions, and share practical tips to help you create smoother and more professional videos.
Mounting EMEET PIXY Correctly
For optimal tracking performance, EMEET PIXY should be installed in the correct forward-facing position.
The side with the "EMEET" logo printed on the bottom of the camera base is the front side of the device. During installation, make sure this side is facing toward the subject being recorded (such as the streamer, presenter, or speaker).
PIXY supports both landscape and portrait mounting orientations, allowing you to choose the setup that best fits your content needs.
Whether you are livestreaming, teaching online, creating vertical videos, or recording demonstrations, simply adjust the camera orientation according to your shooting scenario.
Important Note: Install PIXY in the Correct Position for AI Tracking
To ensure accurate AI tracking performance, EMEET PIXY must be installed in the standard forward-facing position and placed upright. Do not install the camera at an angle or tilted position.
An incorrect installation angle may affect PTZ movement and prevent the AI algorithm from accurately detecting and following the subject.
|
 |
|
Vertical screen installation
|
Landscape Installation
|
PTZ Gimbal Control
EMEET PIXY features a dual-axis PTZ gimbal system designed to provide flexible camera movement and wider shooting coverage.
With 310° horizontal rotation and 180° vertical tilt movement, PIXY can easily adapt to different shooting environments, from livestreaming and online teaching to product demonstrations and content creation.
Through the EMEET Studio software, users can switch between three different operation modes based on their needs:
- Manual Mode
- Tracking Mode
- Privacy Mode
Each mode is designed for different scenarios, giving creators more control over how they capture their content.
Manual Mode
In Manual Mode, the gimbal does not automatically follow the subject. Instead, users can manually adjust the camera angle to capture a specific view.
This mode is ideal for scenarios that require a fixed camera position or precise framing, such as:
- Product demonstrations
- Static video recording
- Desk setup livestreams
- Tutorials with a fixed shooting angle
Control the Gimbal with the Virtual Joystick
In the EMEET Studio software, open the gimbal control settings and use the built-in virtual joystick to adjust the camera direction.
You can manually control:
- Pan direction (left and right movement)
- Tilt direction (up and down movement)
This allows you to fine-tune the camera position and achieve accurate framing before recording or going live.
Manual Gimbal Adjustment
In addition to software control, PIXY also supports manual gimbal adjustment.
Simply rotate the camera gimbal gently by hand to adjust the shooting angle.
Important Note:
After rotating the gimbal to the desired position, hold it steady for approximately 2 seconds before releasing your hand. This allows the gimbal to stabilize and lock into the current position.
If you release the gimbal immediately, the camera will automatically return to its original position, and you will need to adjust the angle again.
Tracking Mode
Tracking Mode combines AI gesture recognition with advanced human tracking algorithms to automatically detect and follow the subject while maintaining a centered composition.
Once enabled, PIXY can intelligently adjust its gimbal movement to keep you in the frame, allowing you to move naturally without manually repositioning the camera.
Tracking Mode is ideal for dynamic scenarios such as:
- Livestreaming and interactive content
- Online teaching and presentations
- Fitness coaching and workout videos
- Product demonstrations
- Content creation where movement is required
With AI-powered tracking, creators can focus on their performance while PIXY automatically handles framing and camera movement.
How to Enable or Exit Tracking Mode
EMEET PIXY provides two convenient ways to activate or disable Tracking Mode:
After connecting PIXY to your computer, open EMEET Studio and simply select "Tracking Mode" to enable AI tracking. To exit Tracking Mode, switch to another camera mode through the software.
PIXY also supports hands-free gesture control, allowing you to enable or disable tracking without opening the software.
To activate Tracking Mode: Place your open palm beside your face or body within the camera frame. Hold the gesture for approximately 2 seconds. The indicator light will flash blue twice and then remain solid blue, indicating that Tracking Mode has been successfully enabled.
To exit Tracking Mode: Repeat the same open-palm gesture. The indicator light will return to a solid green state, indicating that Tracking Mode has been disabled.
|
 |
|
Gesture control
|
Gesture control switch
|
Important Usage Tips for AI Tracking & Gesture Control
- Keep Your Face Clearly Visible — When using hand gestures to enable or disable Tracking Mode, make sure your face is not covered or blocked. Obstructions may prevent the AI algorithm from accurately detecting facial features, which can reduce tracking accuracy.
- Keep the Subject Centered During Gesture Control — When performing gesture commands, keep yourself positioned near the center of the camera frame. This allows PIXY to clearly capture facial and body features, improving gesture recognition accuracy.
- Ensure Sufficient Lighting Conditions — Lighting conditions can affect AI recognition and tracking performance. In low-light environments, PIXY may have difficulty detecting human outlines and movement patterns accurately. For the best experience, use PIXY in a well-lit environment or add additional lighting equipment when needed.
- Install the Camera Upright — For proper AI tracking performance, PIXY must be installed in the standard upright position. Do not place the camera at an angle or in a tilted position, as incorrect placement may prevent the tracking function from working properly.
- Optimized for Single-Person Tracking — PIXY's tracking algorithm is optimized for single-person scenarios. When multiple people appear in the frame, the camera will prioritize the person with the larger face size or greater presence in the image. This may cause tracking shifts or reduced tracking accuracy. For the best results, use PIXY for individual livestreams, presentations, tutorials, and personal content creation.
- Hold Gesture Commands for About 2 Seconds — When using gesture control to enable or disable Tracking Mode, keep the gesture steady for approximately 2 seconds. A quick hand movement or brief gesture may not be recognized as a valid command.
Privacy Mode
Privacy Mode provides a physical and software-based privacy solution when PIXY is connected but not actively being used for video capture.
When Privacy Mode is enabled, the PTZ gimbal automatically rotates the camera lens downward to the physical privacy position, completely blocking the camera's viewing angle. At the same time, the video output signal is disabled to provide an additional layer of privacy protection.
This mode is ideal for situations where the camera remains connected but you temporarily do not need video recording, such as:
- Between livestream sessions
- During breaks in online meetings
- When stepping away from your workspace
- When privacy protection is needed without disconnecting the device
How to Enable Privacy Mode
PIXY supports three ways to activate Privacy Mode:
- Manual Activation — Manually tilt the camera lens downward beyond -79°. Once the gimbal reaches this position, PIXY will automatically trigger Privacy Mode.
- Software Activation — Open EMEET Studio and click the "Privacy Mode" button to enable privacy protection instantly.
- Automatic Activation — When PIXY remains idle and no application is accessing the video output, the camera can automatically enter Privacy Mode after a preset waiting period. Users can customize the automatic activation time in EMEET Studio, with available options including: 10 seconds, 1 minute, Never.
|
 |
Important Note
Due to the physical design limitations of the device, Privacy Mode is not available when PIXY is installed in portrait orientation.
The Privacy Mode activation methods mentioned above currently support landscape installation only. For full privacy protection functionality, please install PIXY in the standard landscape orientation.
Save Startup Position
EMEET PIXY supports a custom startup position feature, allowing users to save their preferred shooting angle as the default position when powering on the device.
By default, PIXY automatically returns to its original home position after startup. With a customized startup position, the camera will automatically move to your saved angle every time it is powered on, providing a faster and more convenient setup experience.
This feature is especially useful for users who frequently record in the same environment, such as:
- Livestream setups
- Online teaching spaces
- Product demonstration stations
- Desktop content creation setups
How to Save a Startup Position
After saving, PIXY will automatically return to this preset position each time the device is powered on.
Preset Positions
The Preset Position feature allows EMEET PIXY to save multiple commonly used camera angles and quickly switch between different shooting setups with a single click.
By saving preset PTZ positions in advance, creators can easily adapt to different livestream scenes and shooting requirements without manually readjusting the camera each time.
This feature is especially useful for:
- Multi-scene livestreaming
- Product demonstrations
- Online teaching
- Content creation with different camera angles
With preset positions, PIXY helps creators achieve a smoother and more efficient multi-angle shooting workflow.
How to Set Up Preset Positions
You can also use the remote control to cycle through saved preset positions in sequence for quick scene switching.
Remote Control (Optional Accessory)
Note:
The remote control is an optional accessory and is not included as a standard package item.
The R2 Remote Control is designed for EMEET Studio-compatible camera models, providing convenient access to various camera operations, including image adjustments, preset position switching, and PTZ control.
How to Use Remote Control
To use the remote control:
- Connect the remote control USB dongle to your computer.
- Launch EMEET Studio and complete the camera connection.
- Use the remote control to operate PIXY and adjust camera settings.
Important Note:
EMEET Studio must be running and connected to the camera when using the remote control.
Supported Functions
The R2 Remote Control supports multiple operations, including:
- Image flip and mirror adjustment
- Frame position adjustment
- Zoom control
- Brightness adjustment
- Multi-camera position switching
- PTZ gimbal control
With the remote control, users can quickly adjust camera settings and switch between shooting scenes without interrupting their workflow, making it ideal for livestreaming, presentations, online teaching, and content creation.
Frequently Asked Questions
Q: What is EMEET PIXY used for?
A: EMEET PIXY is an AI tracking PTZ webcam designed for livestreaming, online teaching, presentations, product demonstrations, and content creation. With AI tracking and PTZ movement, PIXY helps creators stay in frame without manually adjusting the camera.
Q: Can EMEET PIXY automatically follow my movement?
A: Yes. PIXY's Tracking Mode uses AI gesture recognition and human tracking algorithms to automatically detect and follow the subject while maintaining a centered composition.
Q: Does EMEET PIXY support different camera angles?
A: Yes. PIXY supports PTZ gimbal control and preset positions, allowing users to adjust camera angles manually or quickly switch between saved shooting positions for different scenarios.
Q: Can I use PIXY for livestreaming without a camera operator?
A: Yes. With AI tracking, automatic framing, and PTZ movement, PIXY helps solo creators achieve a more dynamic livestreaming setup without needing someone to control the camera.
Q: Does EMEET PIXY protect my privacy?
A: Yes. Privacy Mode physically rotates the camera lens downward to block the viewing angle and disables video output when the camera is not in use.
Final Thoughts: Create Professional Videos with EMEET PIXY
Creating professional livestreams and videos no longer requires a complicated studio setup or a dedicated camera operator.
With AI-powered tracking, a dual-axis PTZ gimbal, gesture control, privacy protection, and customizable preset positions, EMEET PIXY gives creators more flexibility and control over their video experience.
Whether you are a livestream creator looking for smoother camera movement, an online instructor who needs hands-free tracking, or a professional who wants a more engaging video presence, PIXY provides an easier way to create dynamic, studio-quality content.
Upgrade your video setup with EMEET PIXY AI Tracking Webcam and experience a smarter way to stream, teach, present, and create.
