EMEET AirFlow

1. Connect to a mobile phone

Put both earbuds in the charging case and press and hold the touchpad on both earbuds until the status indicator light on the outside of the charging case flashes blue, indicating that the earbuds are in Bluetooth pairing mode.

On your mobile phone, select EMEET AirFlow from the list of available Bluetooth devices to pair.

Once the connection is established, the light on the charging case will turn steady blue.

2. Connect to a PC computer

Insert the included USB dongle into a USB port on your computer. The dongle will automatically connect to the earbuds.

The status indicator light on the dongle will flash blue, indicating that it is in pairing mode.

Once the connection is established, the light on the dongle will turn steady blue.

1. Check the battery level of the earbuds:

1. The battery level of the earbuds and the charging case can be checked in the EMEET TUNE application.

2. iOS users can check the battery level of the earbuds by adding the battery widget, and Android users can view the battery level of the Bluetooth earbuds.

2. Check the battery level of the charging case:

1. The battery level of the earbuds and the charging case can be checked in the EMEET TUNE application.

2. Charging case battery level status (the light will stay on for 3 seconds when opening/closing the case): green light indicates that the battery level is above 20%, and red light indicates that the battery level is below 20%.

Our earbuds charging case features built-in UV light that can eliminate 99.9% of common bacteria found on earbuds, such as E. coli and Staphylococcus aureus, in just 1 minute.

1. Automatic sterilization

When the sterilization conditions are met, and the charging case is connected to USB charging, it will automatically start UV sterilization within 2 seconds.

2. Manual sterilization

When the sterilization conditions are met, press and hold the UV button for 2 seconds to manually start UV sterilization within 2 seconds.

3. Sterilization conditions

1. The charging case is in the charging state or the battery level of the charging case is above 20%;

2. One or two earbuds are placed in the charging case;

3. The charging case is in the closed state.

All three conditions must be met to start the sterilization function.

1. Inserting the microphone boom:

Take out any earbuds and the microphone boom from the charging case. Check the microphone boom and earbud microphone interface to ensure there are no foreign objects.

Align the plug of the microphone boom with the earbud microphone interface until the metal part of the plug of the microphone boom is completely inserted into the interface. Otherwise, it may affect the pickup effect.

2. Removing the microphone boom

When the microphone is not needed, it can be removed from the earbud interface. Please do not pull too hard to avoid damaging the microphone or earbud.

After removal, it is recommended to put the microphone boom back into the charging case slot to avoid loss or damage.