Home   /   FAQ   /   Headset FAQ   /   HS150 FAQ

HS150 FAQ

1、What's in the box?

It contains a HS150 Headset, a carrying bag, a USB dongle, a USB cable, a safety guide, and a user manual.

Bluetooth Headset HS150 with Microphone

 

2、 Device display

Bluetooth Headset HS150 with Microphone

 

3、How to turn on/off the device?

Auto power on

The device will automatically turn on when connecting to a computer via USB cable, no need to slide the On/Off switch by yourself.

And the device will broadcast the power-on prompt tone to remind you.

When the device is disconnected from the computer, it will automatically turn off.

Manually power on

Slide the On/Off switch to On or Off position to power the headset on or off.

When it turns on/off, it will have the prompt tone to remind you.

Bluetooth Headset HS150 with Microphone

 

4、How to connect the device?

USB Connection

Connect the HS150 to your computer by using a USB-C cable, then it will automatically turn on.

And the device will broadcast the power-on prompt tone to remind you.

Bluetooth Headset HS150 with Microphone

Bluethooth Connection

1. Connection Steps:

  • Follow the below steps to pair the HS150 with your mobile devices:

    Turn on the Bluetooth setting on your device.

    Slide and hold the On/Off switch to the Bluetooth position until the LED flashes blue and voice guidance is heard.

    Bluetooth Headset HS150 with Microphone

    Enter the Bluetooth menu of your device, then select "EMEET GeniusCall HS150" from the available devices list.

    Bluetooth Headset HS150 with Microphone

    When it is connected successfully, the Bluetooth Headset HS150 with Microphone status indicator lights up blue and goes out after 5 seconds.

    Note: To re-pair the headset to the USB dongle, please download EMEETLINK application for settings.

2. Disconnect

  • Slide and hold the switch to the Bluetooth for 3s, the Bluetooth button on the headset, the device status indicator turns blue and flashes.
  • Under this way, to connect via Bluetooth again, you need enter the Bluetooth menu of your mobile device and select HS150 from the available devices list.

3. Reconnection

  • When the device is turned on again, the bluetooth will be reconnected to your mobile device(the last connected device) automatically.
  • And there is no need to dial the switch key to Bluetooth.

4. Connect two devices at once via Bluetooth.

  • For example, you can connect 2 different devices via Bluetooth and 1 device via USB cable at once.
  • Or connect 1 device via USB dongle and 1 device via Bluetooth.

USB Dongle Connection

1. Automatically connect

  • When the device is turned on, plug Dongle into the computer.
  • After automatic pairing, the device status indicator lights up blue and goes out after 5S, it means the Dongle has been successfully connected.
  • And the device will broadcast the power-on prompt tone to remind you.
Bluetooth Headset HS150 with Microphone

2. Dongle status

Status Dongle Display
Pairing Flashes blue
Paired Steady blue
Incoming call Green
Skype for Business incoming call Flashes green
Microphone muted Steady red
Headset low battery Flashes red

3. Pairing of USB Dongle

To pair a dongle with your EMEET HS150, please operate as follows:

  • Insert the dongle to a USB port, and open the Bluetooth of your device.
  • Open the EMEETLINK software.
  • Click the search button, then click HS150 from the devices list.
  • When it shows "Connected", the dongle is paired successfully.
Pairing of USB Dongle

5、How to connect two devices at once via Bluetooth?

1. Two phones connect simultaneously via Bluetooth

  • Slide and hold the On/Off switch to the Bluetooth position until the LED flashes blue. The device enters pairing mode.
  • Let both phones search for the device and click to connect.
  • After the connection is successful, the Bluetooth indicator of the device stays blue and turns off 5 seconds later.

2. Have connected one mobile phone and want to connect to the second one

  • Put the device in pairing mode.
  • Mobile phone 1 will be automatically disconnected.
  • Search for EMEET HS150 device and click to connect on mobile phone 2.
  • Just click to connect on the mobile phone 1 again.

3. Dongle connects to a computer, a phone connects via Bluetooth

  • Put the device in pairing mode.
  • Wait for the mobile phone connected to the HS150 successfully
  • Then insert the USB Dongle into the device.

6、How to check the device's power? How to charge the device?

Check battery level

When you turn on the device, there are three indicator LED and prompt tone.

During you use the device, dial the switch key to the Bluetooth, it also has the indicator LED and prompt tone to remind you.

Status LED
Charging Steady red
Fully charged Steady green
Low/Critically low Turns red
Medium Turns yellow
Full Turns green

At the same time, you can also check the remaining talk time of the device by using EMEETLINK.

check the remaining talk time

Charge the device

Please plug the device into an outlet via a USB cable.

When the battery is not fully charged, the status indicator lights up steady red.

When the battery is full, the status indicator lights up steady green.

Charge the device

Battery life and battery capacity

The headset has a 120-hour battery life and supports a 48-hour continuous call.

And it has a 6-hour battery life on a 15-minute charge.

 

7、How to use the device to play music?

Button display

Button display

Adjust the volume

Short press the "+" / "-" button of the device to increase/decrease the volume of the device.

There are 10 sections of the volume.

Every time you press the "+" button, the volume number will increase by 10%.

Until press 10 times, there is up to the max volume.

Switch songs

Long-press the device volume "+" button, and the music will skip to the next song.

Long-press the device volume "-" button, and the music will jump to the previous song.

Play/Pause songs

Manually play/pause songs

Short press the multi-function button of the device to play or pause the music.

 

8、How to use the device to make calls?

This function can be used on telephone communication and Skype for business when the device is connected to your mobile/computer.

use the device to make calls

Use the multi-function button during a call

  • Short press the button to answer and hang up calls.
  • Long press the button for 3 seconds to reject calls.
  • Double click the button of the device to call back.

Use the multi-function button during multiple calls

  • New incoming call when a call is in progress.
  • Press the Multi-function button. Answer the incoming call and keep the current call active.
  • Hold the Multi-function button to reject the call.
  • Two calls are answered, with one held and one active.
  • Press the Multi-function button. Switch between held call and active call.

 

9、How to mute the microphone of the device?

Rotate the microphone boom

  • When using the headset during a call, rotate the microphone boom to mute/unmute it.
Rotate the microphone boom

 

Pressing the mute button to mute the microphone.

  • Short press this button to mute the device, unmute it by pressing this button again.
Pressing the mute button

 

10、How to turn on/off the ANC Noise Reduction & Ambient Sound & Off Mode

  1. The headset defaults to the Off mode(ANC Off, Ambient sound off).
  2. Short press to switch to ANC on Mode.
  3. Short press to switch to ANC off Mode.
  4. Short press to switch to Ambient Sound on Mode.
  5. Short press to switch to Ambient Sound off Mode.
 turn on/off the ANC Noise Reduction

 

11、How to turn off the voice prompt?

By default, the voice guidance function is enabled. You may download EMEETLINK to disable this function.

 

turn off the voice prompt

12、How to reset the device?

Hold Volume "+" and Volume "-" at the same time for 10s to restart the headset.